FreeMind 0.9.0: The New Features

Site map Main Page Download Asked questions Screenshots Accessories FreeMind on Linux Development Marketing Essays Stuff

A great release is to come. We have many exciting new features: WYSIWYG-Editing for nodes and notes, scripting, filter, attributes and many more. But all these new features still need a lot of testing and documentation. To start this, please have a look at the newest version here and tell us your opinions. Use this wiki page for documenting the new features. But: Don't use this version for productive maps. It is not stable enough! Further warning: If you create a map with Attributes, it will open as a "New Map" with no data in version 0.8. Your data is not lost, just not readable by 0.8. Attributes Quick Attribute creation select node Edit Attribute: Alt-F9 or, Rt-click>Edit attributes type in an Attribute name then add a value if desired edit with the Attribute Manager later if necessary Using Attribute Manager open the attribute manager with attribute icon on toolbar or, Tools>Attribute Manager Create Attribute Click the "Edit" button in the "All Attributes" row Type in your Attribute name, then press add Repeat to add multiple attributes Press "Close" to close the Attribute Edit dialog NOTE: This is also the place to delete Attributes Create Attribute values After adding Attributes, you should see them listed under the "Attributes" column heading Click on the "Edit" button in the row of your new Attribute and add the values type the value name, then press "Add" It's a good idea to add a blank value to the list. It helps when assigning attributes later Close the Attribute value dialog by pressing the "Close button" NOTE: this is the place to delete Attribute values Every Attribute can have multiple values eg. I use an Attribute called "Staff" and the values are the staff person's name eg. I use an Attribute called "Priority" and the values are #'s 1 to 5 Assign Attributes to nodes assigning only a few nodes Choose the node, press Alt-F9 or, Rt-Click the node and choose "Edit Attributes" To add more attribute per node, use TAB key (if View>Attributes>Show all attributes is selected), or use the following. got to: Tools>"Assign attributes..." choose "Selected Nodes" or "Visible Nodes" from the drop down list, choose the Attribute you want to assign. (Here it helps when there's a blank value. You can assign an Attribute to all nodes needing it, and then set the value later, on a node by node basis) press the "Add" button to assign the Attribute to the node/s add more than one attribute to a node if necessary delete attributes from multiple nodes with this dialog Viewing/Hiding Attributes to see an icon on nodes with attributes Tools>Preferences>Appearance>Show icon for attributes show all attributes Alt-s or, View>Attributes>Show all attributes show no attributes Alt-h or, View>Attributes>Show no attributes show selected attributes in the Attribute Manager, select desired Attributes in the "Selected Visible" column then, View>Attributes>Show selected Attributes optimize the width of the Attribute/value table Rt-click on the Attribute and choose optimal width User feedback Report on potential bugs. With FreeMind 0.9.0 beta 8, Duplicated attributes added; when add an attribute to node which already has the attribute, the attribute will be showed as many times as added. However, when deleting the attribute from node, all instances of the attribute would be deleted.--yushen 02:23, 25 Nov 2006 (PST) The key bindings of alt-s and alt-s do not work as expected of showing or hiding attributes.--yushen 02:23, 25 Nov 2006 (PST) Really wish for a feature to only selectively show the attribute of the node in focus. The current options of "show all attributes", "show the selected attributes" all apply to all the nodes visible. With all nodes showing attributes, it occupy too much space. I wish that it only shows all the attributes for the current node being selected, i.e. in focus. This would be often enough for normal use.--yushen 20:36, 1 Dec 2006 (PST) It is not possible to delete an attribute from the List of attributes. If one is created, it lives forever .... It seems that using tool/assign attribute by selecting the attribute in question, and select delete all values, it's possible to remove an attribute of a node. --yushen 21:19, 15 Jan 2007 (PST) Default attributes of new node: I need to add some attributes to all new nodes. Therefore, I wish that there is mechanism to automatically stuff some default attributes to all the new nodes created after the functionality is enabled. This function may be configured to enable/disable. --yushen 21:19, 15 Jan 2007 (PST) Or there is functionality to add a group of selected attributes to a group of selected nodes through one operation. --yushen 21:19, 15 Jan 2007 (PST) You explained how to create attribute etc... but after spending "only" 30 minutes on it, what is the real interest in practice of such feature ? What is the use of attributes ? not clear what it can be used for ....--Djerr 17:49, 20 Jan 2007 Filter Create filters to view and print the data more effectively click on the little funnel to the left of the zoom size toggles on and off default values are useful no filtering Currently Selected Nodes create filter for one Attribute to the right of the filter status, click "Edit" in the drop down menu at the top right, select your attribute the expression drop changes to "exists" press "Add", then "OK" at the bottom all nodes with the selected Attribute will be shown create filter for one Attribute and its value after step two above select the second drop down where "exists" is showing choose "Is equal to". Your values should now be available in the third drop down press "Add", then OK use multiple filters at once create two filter sets by the method above select the filter sets you want Shift-click for multiple, continuous sets Ctrl-click for non-contiguous selection press the "and" button on the right => a new set is created which combines your selected sets filter on an icon add an icon to a node by highlighting the node, click on the icon on the left or Rt-click>Icons in the filtering "edit" dialog, choose "Icon" in the drop-down list at the top left, the second drop-down grays out, and the third contains the list of currently used icons click "Add" user feedback Write your feedback on use of filters here. when in filtering mode, a node is selected. Then when the filter is removed, the selected node remains selected, yet not in center of screen, a search through the map is required to locate it again. Could the selected node be centered after removing the filter?--Neanderlander 08:16, 11 Sep 2006 (PDT) I find that it freezes up a lot when using folding and unfolding while applying filters. It is, however, a really powerful feature. To complete its power would it be possible to have a way to copy only selected or filtered nodes? Sometimes you want to select these nodes and put them in another application, but when I filter, select all and then copy-paste, I get lots of other nodes included. Worked well for me. Especially like the filter on icon - no muss, no fuss. One suggestion: is there any thought being given to saving filters (or did I miss something)? The addition of notes in this version seems to break backward compatibility, so that shouldn't be an issue. -- RichardForster10:40 20 Sep 2006 (EST) Great feature. But filtering on an icon ist restricted to "=", no possibility to filter on "is not"? For example if you have "OK" icons on some nodes and want to see all other nodes (= not OK). WYSIWYG-Editing for nodes and notes Yet to be documented User Feedback Love this feature, especially the way that the notes export to javascript enabled html. Couple of observations. The popup notes in the Javascript export don't seem to work in IE (care factor 0?). It would be good to be able to view the note in the main mindmap window, maybe as a popup. It would also be helpful if there was some sort of visual indicator of the existence of a popup note in the exported html - at present the note just magically appears as a rollover. Don't know if it is due to this feature, but "edit long node" now introduced an extra line feed if the enter key is used (confirm on enter turned off). --RichardForster 18:04, 19 Sep 2006 (PDT) I'd like to have the option to collapse the WYSIWYG editing area to free up more screen real-estate. --Marko 21:45, 23 Sep 2006 (PDT) The WYSIWYG screen estate seems a good place to do all 'richer' content editing: e.g. if freemind would let me edit the multiline text nodes there, and, manage the attributes, i'd find that very usefull. --Neanderlander 22:01, 24 Sep 2006 (PDT) Some way to change the width of nodes would be great, so free form text can be flowed into thinner columns. Also a way to insert <br> easily without resorting to the html view. --pedron 1:02pm, 10 October 2006 (EST) In version 0.8 the note attached to a node was very discrete in the sense that it would only show when the mouse is on that node. This new version has many editing features but it's "in your face" (so to speak) until you physically minimize it. I wish there was a way to configure it so that it would act like the previous version while keeping it's editing extras. Or at least have the option of toggling editing toolbar... --Cichutki75 8:09pm, 19 October 2006 (GMT) In version 0.9 max node width function does not work properly. At least not all nodes for the map created in version 0.8 keep the set width. I did not discover the rule. Some keep some don't. --VincentD 02:30, 9 Nov 2006 (PST) Export to Flash does not support Rich Formatted nodes. --CautiousChaos 02:22, 12 Nov 2006 (EST) The editing panel is intrusive when it is not needed. A hotkey to open/close it would be helpful. Clicking on the note icon resulting in the panel appearing could also be very helpful. It seems that word-wrapping does not work in plain-text mode for nodes, making the node to be of single line extending far too long. I had to change the mode of each node to make it word-wrapping. Only using rich-text mode, the wrapping would work. I wish that word-wrapping would still work as in 0.80. --yushen 15:03, 5 Dec 2006 (PST) It seems that in editing long node, the splitting function would only work with word on different line, while in 0.80, the function works even for words on the same line. --yushen 15:03, 5 Dec 2006 (PST) --Djerr 17:42, 20 Jan 2007 Using a 0.8 map with notes in 0.9 beta version show all notes as pop up but they can not be modified with the format tool or even edited in the layout page. I have to delete the note and create a new one under the 0.9 version. I usually write short nodes but very long notes in order to have a "clear" map. 2 special comments on notes : For long notes, the time the pop up is shown is too short. Would it be possible to define a time on how long you want this pop up to be shown ? I could find very useful (especially for my long notes) to be able in the format menu to change not only italic or bold or font size etc.. but also COLORS, to be able to see very fast the most important points Scripting via Groovy Groovy scripts may be attached to individual nodes in the map. When "evaluate" is selected via the menu or keypress (Alt-F8), all nodes in the map are searched (depth-first) for one or more attributes named "script". If such an attribute is found, the value of the attached attribute is passed to the Groovy engine to execute. Only nodes are evaluated, which attribute keys start with "script". However, there is nothing preventing a script on one node from acting on other nodes via normal operations (e.g. node.getChildren or similar) as far as I can tell from the code. Assignment vs. Operation If the value of the script attribute starts with the equals sign ("="), then the node text will be replaced by the RESULT of the script evaluation. Be careful not to overwrite your nodes! See the example for using the "node.getText()" in an assignment script. If the value of the script attribute does not begin with the equals sign, then the script will run and may affect the map, but the expression result is not assigned to the node text. Available Operations When the Groovy binding is created, two variables are set: "c" is set to the MindMapController "node" is set to the MindMapNode being evaluated You will have to examine the FreeMind source code for operations on the interfaces. See the examples for a few operations such as setting the node text, node color and background color. Examples I have only played with the engine for five minutes, and spent about the same amount of time on the Groovy home page. The following examples work for me: Prepend the node text with an integer representing the node depth. Note that the script starts with '=' so the result is assigned back to the node text. =node.getNodeLevel() + " " + node.getText() Set the text color of a node: node.setColor(java.awt.Color.RED) Set the background color of a node: node.setBackgroundColor(java.awt.Color.BLUE) Project Manager: Don't do this; use methods of the controller c instead. If you manipulate the node model directly, you'll miss the undo and flow control capabilities of FreeMind. Please, consult methods from the interface MindMapActions only. Advanced Examples WARNING! I have now played with Groovy for 30 minutes and I am unsure of the side effects to FreeMind of using these examples, as they modify children of a node. - Dave Torok Prepend the modified date at the beginning of the node text This is an example of using some more Node methods. =(new java.text.SimpleDateFormat("M/d/yyyy")).format(node.getHistoryInformation().getLastModifiedAt()) + " " + node.getText() Add up all subnodes and set them into the first row, second column. Copy the script into subnodes if you want go more than one level. As far as I can tell you can't grab the values by attribute name, just by row / column, but I didn't spend forever looking over the source.. (Maybe someone could push some javadoc?) def i = node.childrenUnfolded(); def total=0; while (i.hasNext()) { d = i.next(); def val=d.getAttributes().getValueAt(0,1); if (val!=null) total=total+java.lang.Integer.parseInt(val); }; node.getAttributes().setValueAt(total, 0,1); The above code has a problem that it will let leaf node and its parent nodes with the script to yield 0 value. The following code would work recursively. if (!node.isLeaf()) {def i = node.childrenUnfolded(); def total=0; while (i.hasNext()) { d = i.next(); def val=d.getAttributes().getValueAt(0,1); if (val!=null) total=total+java.lang.Integer.parseInt(val); }; node.getAttributes().setValueAt(total, 0,1);}; --yushen 15:35, 15 Jan 2007 (PST) Set the color for all children This is an example of iteration over child nodes. Also, a call to c.nodeStructureChanged(node) is necessary to force a refresh to paint the new color. def i = node.childrenUnfolded(); while (i.hasNext()) { d = i.next(); d.setColor(java.awt.Color.BLUE); }; c.nodeStructureChanged(); Swap two CHILD nodes. This works. My goal is to get a foundation for a SORT script, to sort children by alphabet, by created date, etc. until the functionality is added to the software. WARNING WARNING WARNING this is just an example to swap the 2nd and 4th child nodes. def swap (a,b) { na = node.getChildAt(a); nb = node.getChildAt(b); node.remove(a); node.remove(b - 1); node.insert(nb,a); node.insert(na,b); c.nodeStructureChanged(node); }; swap(1,3); Add/Replace today =nt=node.toString(); pos=nt.indexOf(" / "); return ((pos>=0)?nt.substring(0,pos):nt) + " / " + (new java.text.SimpleDateFormat("yyyy-M-d")).format(new Date()) About Groovy For people unfamiliar with Groovy scripting, it's home page, an introduction, a review on slashdot. How to get started Create an attribute for a node. The attribute must be named "script" Create the Groovy script and set as the value of the attribute Press Alt-F8 or select "Evaluate" from the Tools menu. Wish for Groovy script editing Need good editor for writing such script for the attribute. The current attribute manager is not suitable to write long script. --yushen 15:41, 15 Jan 2007 (PST) Tips of editing script Before there is good editor for script, I use a template node to define long script then use copy and paste to duplicate the script. --yushen 15:41, 15 Jan 2007 (PST) TaskJuggler Integration TaskJuggler is a opensource project management tool for linux. It covers the complete spectrum of project management tasks from the first idea to the completion of the project. It assists you during project scoping, resource assignment, cost and revenue planing, risk and communication management. Idea The idea is to have special task and resource nodes on the mindmap. These node's attributes contain information needed for generating taskjuggler include files through xslt transformation. You can find more info about these attribs in TaskJuggler documentation Tasks are defined as subnodes of TASKS node, similarly resources are defined as subnodes of RESOURCES node. Project file (TJP) We generate only includes with FreeMind, so we must write simple TaskJuggler main project file: project simple "Simple Project" "1.0" 2005-06-06 2005-06-26 taskreport "Gantt" { columns start {title "Start"},name, end {title "End"}, duration, chart #loadunit days #hideresource 1 } include "example.resources.tji" include "example.tasks.tji" taskreport "My Tasks" Include Files (TJI) Mindmap with defined TASKS and RESOURCES nodes can look like this: We can export include files which we have defined in our project file directly from FreeMind mindmap: example.resources.tji - from RESOURCES node (File->Export->Resources from RESOURCES node to TJI file..) example.tasks.tji - from TASKS node (File->Export->Task from TASKS node to TJI file..) In TaskJuggler our project will look like this: Download Here you can download full example. Freemind version info You have to compile FreeMind from CVS to use this functionality (FreeMind ver. 0.9.0 beta 9, CVS tag: fm_060405_integration) The rest new features To Do ) Moving a branch from one side of the root to the other - the text and child branches should "flip" to enable this